Progress Menu
x
Home / Dolls / Garments, Skirts, Toys and Dolls
This pattern is copyrighted 2021 to Rebecca Page by app.youmakehq.com
Please feel free to make garments from this pattern to sell. If you do, we would love you to include a credit to app.youmakehq.com as the pattern designer, but it is up to you.
The finished product may only be sold by crafters. It may not be mass produced. You can only sell the finished product; you cannot sell the pattern or these instructions.
Best of luck and happy sewing!
5
Dolls Stevie Jersey Skirt
Member Rating
Difficulty Level
Beginner
Equipment Needed
Description
This is a lovely dolls jersey skirt sewing pattern with no fastenings. There are four length options so you can make multiple skirts for your doll.
Includes sizing for 18-inch doll.
Not a member yet? Click here to sign up
- +Preparation
- Fabric needs to be a stretch / knit fabric. 2- or 4-way stretch fabric will work. Do not use a woven fabric.
- Suggested fabrics are – Cotton lycra 5%, rayon spandex, viscose spandex, bamboo spandex, ITY jersey, cotton jersey, French terry, hacci sweater knit, interlock, and ponte.
- Make sure to check the weight of your fabric to ensure it is opaque enough that you are happy with it when it is stretched slightly (some lighter weight knits can be slightly transparent or see through).
- We recommend at least 30% stretch. To check how much stretch your fabric has, take a piece of fabric, and pull along its stretch. If it allows you to stretch it at least 30% longer than its original length, then it has at least 30% stretch. I.e. A 2-inch piece of fabric (unstretched) should be able to be stretched to 2.6 inches.
- The stretch recovery of your fabric is just as important as the stretch percentage. This will ensure your skirt maintains its shape and fit for as long as possible and does not become baggy. To test the stretch recovery (elasticity), simply check that when you stretch your piece of fabric it returns to its original size.
- OPTIONAL 1 inch wide elastic for the Waistband – approximately 1.5 yards will be sufficient for all sizes.
- Thread to match
- Skirt – Fabric cut 2
- Waistband – Fabric cut 1, OPTIONAL Elastic cut 1
- Use a ball point needle of a size appropriate to your fabric when working with knits – The ball point needle has a slightly rounded tip and will prevent damaging the fibre. Use ball point pins or clips and, if you can’t, use regular pins into the seam allowance and you should be just fine.
- Use a stretch stitch – You can use either a short and narrow zigzag or a stretch stitch (lightning bolt stitch) for construction. Test on a scrap of fabric to find which stitch and tension settings work best for you. You don’t want the fabric to pucker under your stitches.
- Your machine might have many fancy stretch stitches and you are welcome to play with them, but often the basic zigzag or stretch stitch are just right.
- Use a walking foot – Using a walking-foot is not a necessity but it is highly recommended when working on a stretchy knit. The walking-foot helps to prevent one layer of fabric from stretching out while sewing. Both layers of fabrics are fed at the same time under your needle.
- Reduce your presser foot tension – Some machines will allow you to change your presser foot tension. Check your manual to see how to reduce your presser foot tension. Reducing tension will prevent your fabric from stretching while it goes through the machine.
- Use a ballpoint twin-needle (double needle) for top stitching – Using a twin-needle will give you a regular double line of straight stitches on the right side and a short and stretchy zig zag on the wrong side. Alternatively, if you don’t own a twin needle, you can use a medium size zigzag stitch for hemming and topstitching. I like to lengthen my stitch a little when top stitching with the twin needle. Test on a scrap of fabric to find what works best for you.
- Finishing the seams – Because knits don’t fray, it isn’t strictly necessary to finish your seams. That being said, you will achieve a more polished and durable look if you do an overcasting or zigzag stitch on your raw edges.
Project OverviewThe Stevie Skirt
Difficulty Level = Beginner
The Stevie Skirt is an exceptionally fast, easy sew! It comes in above the knee, knee, midi, or maxi lengths. It’s designed specifically for knit/stretch fabrics, and just pulls on over the hips. There are no zips or other fastenings, so it is perfect for beginners.
Our Facebook group is a great place to get help, share your tips and creations! We are a friendly bunch, and we love to help and see what you have made.
Please read the full instructions before getting started.
Wash, dry, and press your fabric before starting your project. A bit of prep now prevents shrinking and means your garment will stay the same size you made it.
Never leave a child or baby unattended or allow to sleep in a garment made from one of our patterns with ties, snaps, buttons, or anything they could remove, choke on, or get caught on. Always use caution if you are unsure. We love our patterns, but we love your bundles of joy more!
SizingSize Range
18 in Dolls
Materials and ToolsFabric Requirements 60 inches/150 cm wide (in YARDS)
Above knee
Knee
Midi
Maxi
Doll
0.25
0.25
0.25
0.50
* If you are using a narrower fabric, a directional print, or a fabric with nap you may need more.
** Make sure to wash, dry, and press all fabrics before cutting out in case they shrink.You will also need:
Tools needed are, sewing machine, optional overlocker, optional twin needle, tape measure, pins or clips, scissors.
Printing Your PatternSettings
The pattern is a separate download. Choose either the US letter paper, A4 paper, or A0 paper size based on the printer you wish to use. If you are in the US or Canada then your printer will likely use US letter paper. Other regions normally use A4 paper. Some people prefer to print their patterns at a print shop: A0 is best in this case.
Print at 100%.
On the second page, you will find a 1-inch and a 3-inch square test box. Print this page first, on its own, and measure these squares.
Once you are happy that the test box is accurate, print the rest of the pattern pages.
Please follow this video for information and assistance on assembling this pattern.
Also, please note that some Rebecca Page patterns and projects also come with cut files and a printable design page which you can use to plan your project if you wish. These are provided in a separate section below to avoid any confusion!
+US Print Charts
Here are which pages to print for the US Files
Above Knee Knee Midi Maxi Doll 2-3 2-3 2-3 2-3 +A4 Print Charts
Here are which pages to print for the A4 Files
Above Knee Knee Midi Maxi Doll 2-3 2-3 2-3 2-3 Cutting InstructionsCut each of the pieces according to the directions on the pattern piece. Seam allowances are all included so just cut them as is.
Cutting Charts – All pattern pieces are included, however, if you prefer to cut using a cutting chart, the dimensions for the rectangular pieces (in INCHES) below:
Waistband
(Fabric cut 1, OPTIONAL Elastic cut 1)Width
Length
Doll
3.2
9.2
Cutting Checklist:
NOTE – To cut fabric on the fold, fold your fabric over parallel to the selvage edges. Align the pattern piece so it is on the fold of the fabric. Cut around the edges, leaving the fold. If you have folded your fabric correctly the fold will be parallel to the two edges of the fabric that are finished. The raw edges (e.g. the ones you could pick at and threads would come off) will be at a right angle to your fold.
Fabric TipsTips for Sewing with Knit Fabrics
Using a serger is not a necessity to sew with knit fabrics! Here are a few tips to get the best results on a regular sewing machine:
Here is an example of some of the stitches you could use.
From left to right: Ballpoint twin-needle, narrow zigzag, stretch stitch (lightning bolt), overcasting. - + Instructions
- SIDE SEAMS – With the right sides together, pin the two Skirt pieces along the side seams. Serge or stitch using ⅜ inch seam allowance. Try on the Skirt to check the fit and adjust, as necessary.
- WAISTBAND – With the right sides together, match up the short ends of the Waistband and pin. Serge or stitch using a ⅜ inch seam allowance. Press open the seam allowance, or, if you have serged the seam, press it to the side. Fold the Waistband in half with the wrong sides together. Divide your Waistband into quarters and mark with pins or clips.
- ATTACHING THE WAISTBAND – Divide the top edge of the Skirt into quarters and mark with pins or clips. With the right sides together, pin the Waistband to the Skirt, matching each of the quarter points. Serge or stitch using a ⅜ inch seam allowance.
- HEM – Fold the bottom edge of the Skirt under ½ inch, press, and pin. Topstitch approximately ⅜ inch from the edge using a either a stretch stitch or twin needle all the way around the hem.
Quick Glance Cheat Sheet⅜ inch seam allowance included
Sewing –
1 . Side SeamsSeam Allowance
⅜ inch seam allowance included
1.1With the right sides together, pin the two Skirt pieces at the side seams.
1.2Serge or stitch using ⅜ inch seam allowance.
FIT CHECK – Try on the Skirt to check the fit and adjust, as necessary.
2 . Waistband2.1With the right sides together, match up the short ends of the Waistband, creating a circle, and pin.
2.2Serge or stitch using a ⅜ inch seam allowance.
TIP – Using a stretch stitch on your sewing machine will allow you to press the seam open. This results in a smoother waistband that has less bulk at the seam.
2.3Press open the seam allowance. If you have serged the seam in step 2.2, then press the seam to the side.
2.4Fold the Waistband in half with the wrong sides together, matching raw edges.
2.5Divide your Waistband into quarters and mark with pins or clips.
OPTIONAL Waistband Elastic – Overlap the raw edges of your elastic by ⅜ inch, ensuring your elastic is not twisted. Stitch together. Place your elastic circle inside your Waistband, so that it is sandwiched between the two wrong sides.
3 . Attaching the Waistband3.1Divide the top edge of the Skirt into quarters, just like you did for the Waistband.
3.2With the right sides together, pin the Waistband to the Skirt, matching each of the quarter points.
The front and back pieces are the same, so pick which you’d like to wear as the front. If you don’t have a preference, just pick a front. Place the seam for the Waistband so it is at the center back point of your Skirt.
Before you continue, make sure you have aligned the raw edges of all three layers (the top of the Skirt and both edges of the Waistband).
3.3Serge or stitch using a ⅜ seam allowance. Be careful not to stretch your Skirt piece while sewing and make sure to catch all three layers of fabric while sewing.
TIP – If you are struggling to sew this without stretching your Skirt pieces, add additional pins or clips in between your quarter points and work in smaller segments.
4 . Hem4.0FIT CHECK – Try the Skirt on and check the length. Allow for a ½ inch seam allowance, and as per the fitting notes, make sure to also allow for the fabric stretch (and springing back up again) if you cut any off.
4.1Fold the bottom edge of the Skirt under ½ inch, press and pin.
4.2Topstitch approximately ⅜ inch from the edge using a either a stretch stitch or twin needle all the way around the hem.
- + Finishing Notes and Congratulations
Finishing Notes and Congratulations
Congratulations, your Stevie Skirt is done. Enjoy!
We would love to hear how you got on and see photos of your finished project!
Join us at our Facebook Group, tag us on Instagram, or use the hashtag #rpstevieskirt.
Thank you for using a Rebecca Page pattern.
© Copyright 2021
All Rights Reserved
Sales + Licencing InformationProject OverviewThe Stevie Skirt
Difficulty Level = Beginner
The Stevie Skirt is an exceptionally fast, easy sew! It comes in above the knee, knee, midi, or maxi lengths. It’s designed specifically for knit/stretch fabrics, and just pulls on over the hips. There are no zips or other fastenings, so it is perfect for beginners.
SizingSize Range
18 in Dolls
Materials and Tools- Fabric needs to be a stretch / knit fabric. 2- or 4-way stretch fabric will work. Do not use a woven fabric.
- Suggested fabrics are – Cotton lycra 5%, rayon spandex, viscose spandex, bamboo spandex, ITY jersey, cotton jersey, French terry, hacci sweater knit, interlock, and ponte.
- Make sure to check the weight of your fabric to ensure it is opaque enough that you are happy with it when it is stretched slightly (some lighter weight knits can be slightly transparent or see through).
- We recommend at least 30% stretch. To check how much stretch your fabric has, take a piece of fabric, and pull along its stretch. If it allows you to stretch it at least 30% longer than its original length, then it has at least 30% stretch. I.e. A 2-inch piece of fabric (unstretched) should be able to be stretched to 2.6 inches.
- The stretch recovery of your fabric is just as important as the stretch percentage. This will ensure your skirt maintains its shape and fit for as long as possible and does not become baggy. To test the stretch recovery (elasticity), simply check that when you stretch your piece of fabric it returns to its original size.
Fabric Requirements 60 inches/150 cm wide (in YARDS)
Above knee
Knee
Midi
Maxi
Doll
0.25
0.25
0.25
0.50
* If you are using a narrower fabric, a directional print, or a fabric with nap you may need more.
** Make sure to wash, dry, and press all fabrics before cutting out in case they shrink.You will also need:
- OPTIONAL 1 inch wide elastic for the Waistband – approximately 1.5 yards will be sufficient for all sizes.
- Thread to match
Tools needed are, sewing machine, optional overlocker, optional twin needle, tape measure, pins or clips, scissors.