Progress Menu
x
This pattern is copyrighted 2022 to Rebecca Page by app.youmakehq.com
Please feel free to make garments from this pattern to sell. If you do, we would love you to include a credit to app.youmakehq.com as the pattern designer, but it is up to you.
The finished product may only be sold by crafters. It may not be mass produced. You can only sell the finished product; you cannot sell the pattern or these instructions.
Best of luck and happy sewing!
6
![]()
![]()
Tie Shoulder Handbag
Member Rating
Difficulty Level
Beginner
Equipment Needed
Description
The Tie Shoulder Bag is an adorable accessory for day or night! Large enough to hold your necessities without being overwhelming, this bag is simple to make and even simpler to wear. The tie handle allows customization of the length, so it fits the wearer beautifully. Pick your favorite silky fabrics for a luxurious feel, or add some flair with quilting cotton to highlight your favorite things! The versatility is sure to make this one a staple in your closet.
Instant download digital sewing pattern. The finished bag is 15 inches wide by 11 inches high.
Not a member yet? Click here to sign up
- +Preparation
- Magnetic Snap – 1x ¾ – 1 inch wide
- Interfacing – 2 yards of 20-inch-wide high loft fusible fleece, plus additional as needed depending on your Tie fabric choices.
- Thread to match
Project OverviewTie Shoulder Handbag
Difficulty Level = Beginner
The Tie Shoulder Bag is an adorable accessory for day or night! Large enough to hold your necessities without being overwhelming, this bag is simple to make and even simpler to wear. The tie handle allows customization of the length, so it fits the wearer beautifully. Pick your favorite silky fabrics for a luxurious feel or add some flair with quilting cottons to highlight your favorite things! The versatility is sure to make this one a staple in your closet.
Our Facebook group is a great place to get help, share your tips and creations! We are a friendly bunch, and we love to help and see what you have made.
Please read the full instructions before getting started.
Wash, dry, and press your fabric before starting your project. A bit of prep now prevents shrinking and means your garment will stay the same size you made it.
Never leave a child or baby unattended or allow to sleep in a garment made from one of our patterns with ties, snaps, buttons, or anything they could remove, choke on, or get caught on. Always use caution if you are unsure. We love our patterns, but we love your bundles of joy more!
SizingSize Range
Bag
Finished Measurements (Inches)
Width Height Tie Shoulder Bag 15 11 Materials and ToolsFabric
All fabrics should be non-stretch, woven fabrics. Very thick fabrics are not recommended as it can make the sewing through multiple layers very difficult.
Main Fabric – 0.75 yards will be sufficient. We recommend tweed, home décor fabrics, canvas and more for the outside of the bag.
Lining Fabric – 0.75 yards will be sufficient. We recommend something lighter weight than the outer fabric, a silk taffeta, quilting cotton, or crepe.
Tie Fabric – 1 yard will be sufficient. This can be the same fabric as your lining. We recommend something lighter weight than the outer fabric, a silk taffeta, quilting cotton, or crepe. If you choose a very lightweight fabric, additional interfacing is recommended for one side of each Tie.
You will also need:
Tools needed are, sewing machine, pins, scissors, tape measure or ruler. Serger/overlocker is optional but not required.
Printing Your PatternSettings
The pattern is a separate download. Choose either the US letter paper, A4 paper, or A0 paper size based on the printer you wish to use. If you are in the US or Canada then your printer will likely use US letter paper. Other regions normally use A4 paper. Some people prefer to print their patterns at a print shop: A0 is best in this case.
Print at 100%.
On the second page, you will find a 1-inch and a 3-inch square test box. Print this page first, on its own, and measure these squares.
Once you are happy that the test box is accurate, print the rest of the pattern pages.
Please follow this video for information and assistance on assembling this pattern.
Also, please note that some Rebecca Page patterns and projects also come with cut files and a printable design page which you can use to plan your project if you wish. These are provided in a separate section below to avoid any confusion!
+US Print Charts
Here are which pages to print for the US Files
Tie Shoulder Handbag 2-9 +A4 Print Charts
Here are which pages to print for the A4 Files
Tie Shoulder Handbag 2-9 Cutting InstructionsCut each of the pieces according to the directions on the pattern piece. Seam allowances are all included so just cut them as is.
Cutting Checklist:
Main Bag – Main x2, Lining x2, Fusible Fleece x4
Flap – Main x2, Lining x2, Fusible Fleece x2
Tie – Tie Fabric OR Lining x4, OPTIONAL Fusible Fleece x2
NOTE – These straps are for a snug fit handbag length. If you would like a longer strap, add length to the wider end of the strap prior to cutting.
- + Instructions
- PATTERN MARKINGS – Transfer pattern markings to fabric.
- INTERFACING – Apply interfacing to Main Bag main and lining, Flap main and lining, and OPTIONAL two Ties.
-
- MAGNETIC SNAP – Using manufacturer’s instructions, install magnetic snap at the markings to one Main Bag outer and Flap lining.
- FLAP – Right sides together, sew curved edge of flap. Clip curves. Turn right sides out and press. OPTIONAL – Topstitch. Baste straight edge.
- PLEATS – Creating a reverse box pleat, baste pleat in place on Main Bag lining and main pieces.
- BAG CONSTRUCTION – Right sides together, sew Main Bag outer together. Clip curves. Turn right sides out and press. Mark center of Flap and Main Bag, the side without the magnetic snap. Right sides together, match centers. Align remaining Flap and stitch in place.
- LINING – Right sides together, sew Main Bag lining together, leaving a 4 to 5-inch gap for turning. Clip curves.
- TIES – Right sides together, sew down each long edge of one set of Ties. If you have interfaced half the Tie pieces, make sure to use one interfaced and one non-interfaced. Trim seam allowance at the point and clip the curves. Turn right sides out and press. Align Tie on right side of Main Bag outer, centered over the side seam. Baste in place. Repeat for second set of Ties.
- ADD LINING TO BAG – Place Main Bag outer inside Main Bag lining, right sides together, keeping the Ties out of the way. Matching seams, pin and sew around top edge. Trim and notch seam allowance to reduce bulk. Turn right side out. Push lining into outer and press top edge. Fix any stitch issues around top edge now. Stitch gap in lining closed, either by machine or by hand.
- FINISHING TOUCHES – Tie handles at correct length for you. Add a bow if desired.
Quick Glance Cheat Sheet½ inch seam allowance included – Top stitching ⅛ inch – Basting ⅛ inch
Preparation –
Sewing –
0 . PreparationSeam Allowance
½ inch seam allowance included – Top stitching ⅛ inch – Basting ⅛ inch
0.1Pattern Markings
Transfer all pattern markings to the fabric using a disappearing ink pen or tailor’s chalk.
0.2Interfacing
Use the manufacturer’s instructions to apply the fusible fleece interfacing to the wrong side of the following pieces: Main Bag, Lining and Flap.
NOTE – If you use a very light fabric for the lining and ties, add interfacing to the wrong side of two Ties.
1 . Magnetic Snap1.1Put the washer of the magnetic snap over the marking on Flap.
Using a fabric marker, mark the two vertical lines through the washer.
1.2Using a seam ripper snip small holes for the connectors (on the vertical lines).
1.3Push the connectors of the Snap inner side through the Flap.
1.4Place the washer on them, and fold the connectors toward the middle.
1.5Iron a small piece of fleece interfacing over the washer. This will prevent the snap from rubbing against the fabric and will add to the life of your handbag.
1.6Repeat steps 1.1 to 1.5 to add the other side of magnetic snap to the Main Bag piece at the marking.
NOTE – Iron a scrap piece of fusible fleece over the back of snap to prevent it causing rub damage. This will also help to support the snap if you use fabric like tweed that can unravel. For this reason, in the photo, two overlapping pieces of fusible fleece were used to support the popper.
2 . Flap2.1Pin Flap pieces right sides together.
2.2Stitch the curved edge using a ⅜ inch seam allowance.
2.3Clip notches into the seam allowance, approximately every ⅜ inch. Clip as close to the stitching as possible without cutting into it. This will help the curve turn out nicely.
2.4Turn Flap right sides out and press.
2.5OPTIONAL Topstitching – if desired, topstitch using a ⅛ inch seam allowance.
2.6Baste the top edge using a ⅛ inch seam allowance.
3 . Pleats3.1Add a pin at each pleat marking. There should be six pleat pins plus one at the center.
3.2As shown in the picture you will be creating two pleats on the Main Bag piece, facing the middle pin.
For this, bring the second pin from the left to match the center pin. This will align the first and third pins.
Pin the pleat to secure.
Repeat this step, starting from the right side, so you will have a mirror pleat.
NOTE – Top edge of the folds should line up.
3.3Baste using a ⅛ inch seam allowance.
3.4Repeat steps 3.1 to 3.3 with the other Main Bag and Bag Lining pieces.
4 . Bag Construction4.1Place the two Main Bag pieces right sides together and pin.
4.2Stitch the curved edge using a ½ inch seam allowance.
4.3Clip notches into the seam allowance, approximately every ⅜ inch. Clip as close to the stitching as possible without cutting into it. This will help the curve turn out nicely.
4.4Turn bag right side out and press.
4.5Mark the center of the Flap top edge.
4.6Aligning the center points pin Flap to the Main Bag without snap side, right sides together.
4.7Now pivot the left side of Flap up, so that the raw edges of Flap and Main Bag are aligned. Pin in place.
4.8Stitch the pinned half of Flap using a ⅜ inch seam allowance.
NOTE – A video of steps 4.8 to 4.9 can be seen here.
4.9Repeat steps 4. 7 to 4.8 to stitch the other side of Flap.
5 . Lining5.1Pin Bag Lining pieces right sides together.
5.2Using a ½ inch seam allowance stitch them together, leaving a 4 to 5-inch gap for turning out the bag later.
TIP – Make some backstitches at the beginning and at the end of the stitching.
5.3Clip notches into the seam allowance, approximately every ⅜ inch. Clip as close to the stitching as possible without cutting into it.
6 . Ties6.1Pin two Ties right sides together. Stitch the two long sides together using a ⅜ inch seam allowance, leaving the short edge open for turning.
TIP – Start stitching at the short edge and stitch to the point. Leave the needle in the fabric ⅜ inch from the point, turn the fabric and stitch the other side.
6.2Stitch the two long sides together using a ⅜ inch seam allowance, leaving the short edge open for turning.
TIP – Start stitching at the short edge and stitch to the point. Leave the needle in the fabric ⅜ inch from the point, turn the fabric and stitch the other side.
6.3Trim the seam allowance at the point and clip into the seam allowance. Be careful to not cut into the seam.
6.4Turn the Tie right side out.
Use a blunt object e.g., a chopstick, to poke out the corner.
Press.
6.5Repeat steps 6.1 to 6.4 to create the second Tie.
6.6Place a Tie on the Main Bag right side, aligning the middle of the Tie short edge with the side seam. Pin.
NOTE – the side seam allowance of the Main Bag should be pressed open.
6.7Baste using a ⅛ inch seam allowance.
6.8Repeat steps 6.6 to 6.7 with the second Tie.
7 . Add Lining to Bag7.1Place Main Bag into Lining right sides together. Make sure that Ties are out of the way.
TIP – You can place Ties through the gap at the base of the lining to keep them out of the way.
7.2Matching the Main and Lining side seams pin the top raw edges. Make sure to match center points.
7.3Stitch top edge around using a ⅝ inch seam allowance.
TIP – You might need a heavy-duty needle and/or a walking foot for thick fabrics.
7.4Trim the excess of seam allowance and make notches into the seam allowance. This will help the top edge of the bag lie nice and flat when you turn it out.
7.5Turn the bag right side out through the gap you left in the lining.
TIP – Make sure you have a lovely top edge seam, and everything is 100% caught in it. You can always turn the bag wrong side out again and reinforce stitching where required at this point.
7.6Pin the gap edges and stitch the gap closed either by machine or hand stitching.
If you stitch by machine, skip to step 8.
For hand stitching with a ladder stitch, follow below.
7.7Use a slipstitch (also called a ‘ladder stitch’) to stitch the gap closed.
Fold your fabric under by ½ inch. You will be stitching along this folded edge.
Thread your needle, tying the two thread tail ends together in a knot. This will provide added strength to your finished seam.
Push your needle up from the inside of the lining to the outside, through one of the folds, pulling the thread tail completely through. Your knotted end will now be nicely concealed within the seam on the inside.
Directly across from your starting point, push the needle down and then back up through the opposite seam fold to create a stitch that is between ¼ – ½ inch long. When you pull the thread through, you will notice that the stitch you just made is concealed within the seam crease, and there will be a horizontal stitch connecting the left and right sides of your opening.
Pull the thread through so that it is taut.
8 . Finishing touches8.1Push the lining inside the bag and roll the top edge nice and flat. You can press this to hold in place.
Tie handle at correct height for you and add a bow.
Your Tie Shoulder Handbag is finished!
- + Finishing Notes and Congratulations
Finishing Notes and Congratulations
Congratulations, your Tie Shoulder Handbag is done. Enjoy!
We would love to hear how you got on and see photos of your finished project!
Join us at our Facebook Group, tag us on Instagram, or use the hashtag #rptieshoulderhandbag.
Thank you for using a Rebecca Page pattern.
© Copyright 2022
All Rights Reserved
Sales + Licencing InformationProject OverviewTie Shoulder Handbag
Difficulty Level = Beginner
The Tie Shoulder Bag is an adorable accessory for day or night! Large enough to hold your necessities without being overwhelming, this bag is simple to make and even simpler to wear. The tie handle allows customization of the length, so it fits the wearer beautifully. Pick your favorite silky fabrics for a luxurious feel or add some flair with quilting cottons to highlight your favorite things! The versatility is sure to make this one a staple in your closet.
SizingSize Range
Bag
Finished Measurements (Inches)
Width Height Tie Shoulder Bag 15 11 Materials and ToolsFabric
All fabrics should be non-stretch, woven fabrics. Very thick fabrics are not recommended as it can make the sewing through multiple layers very difficult.
Main Fabric – 0.75 yards will be sufficient. We recommend tweed, home décor fabrics, canvas and more for the outside of the bag.
Lining Fabric – 0.75 yards will be sufficient. We recommend something lighter weight than the outer fabric, a silk taffeta, quilting cotton, or crepe.
Tie Fabric – 1 yard will be sufficient. This can be the same fabric as your lining. We recommend something lighter weight than the outer fabric, a silk taffeta, quilting cotton, or crepe. If you choose a very lightweight fabric, additional interfacing is recommended for one side of each Tie.
You will also need:
- Magnetic Snap – 1x ¾ – 1 inch wide
- Interfacing – 2 yards of 20-inch-wide high loft fusible fleece, plus additional as needed depending on your Tie fabric choices.
- Thread to match
Tools needed are, sewing machine, pins, scissors, tape measure or ruler. Serger/overlocker is optional but not required.